Configuring the SNMP Settings
Click the [SNMP] tab on the network settings page to configure the SNMP settings.
Item |
Description |
|---|---|
SNMP |
Select whether to enable the machine to use SNMP services. |
Item |
Description |
|---|---|
Target Trap |
Select whether to enable the machine to send traps to the management host (NMS). |
SNMP Management Host 1 |
Enter the IP address or host name of a management host. Can contain up to 32 characters. |
SNMP Management Host 2 |
Enter the IP address or host name of a management host. Can contain up to 32 characters. |
Item |
Description |
|---|---|
Get Community |
Enter the community name to use for authentication of Get requests. Can contain up to 32 characters. |
Trap Community |
Enter the community name to use for authentication of Trap requests. Can contain up to 32 characters. |
Item |
Description |
|---|---|
Location |
Enter the location of the machine. The location entered here is displayed on the main page. Can contain up to 64 characters. |
Contact |
Enter the contact information of the machine. The contact information entered here is displayed on the main page. Can contain up to 64 characters. |
