Scanning from a computer (Mac OS X)
The following procedure uses Mac OS X and PageManager as an example.
The procedure may vary depending on PageManager's version. For details, see the manual for PageManager.
Place the original on the exposure glass or in the ADF.
On the [Go] menu, click [Applications].
Point to [Presto! PageManager X.XX], and then double-click [Presto! PageManager X].
"X" indicates the version of PageManager.
On the [File] menu, point to [Select Source...], and then click [TWAIN...].
In the [Select Source] dialog box, select the scanner, and then click [OK].
On the [Tools] menu, select [Scan Setting...].
For details, see the TWAIN driver Help or the manual for PageManager.
Configure the scan settings as required, and then click [OK].
For details, see the TWAIN driver Help or the manual for PageManager.
On the [File] menu, click [Acquire Image Data...].
Configure the scan settings as required, and then click [Scan].
On the [Presto! PageManager X] menu, click [Quit Presto! PageManager X].
If there are two or more scanners on the network, make sure you have selected the correct scanner. If you have not, click [Select Source...] on the [File] menu, and select the scanner again.
You can use the launcher installed with PageManager to perform the following scan operations easily. For more details, see the manual for PageManager.
Scanning originals into another application.
Passing the scanned files to an OCR application.
Passing the scanned files to an email application to send as attachments.
Saving the scanned files in a preset folder.
