Setting Original Orientation on the TWAIN Scanner

This section explains how to correctly display the top/bottom orientation of scanned originals on a client computer screen.

To correctly display the top/bottom orientation of the scanned original on a client computer, the placement of the original and the settings made in the Scanner Control dialog box must match.

Open the Scanner Control dialog box.
For details about how to open the Scanner Control dialog box, see "Basic Network TWAIN Scanner Procedure".
In the [Original Scan Method:] list, select the place where the original is placed.
If you placed an original on exposure glass, in the [Orig.Orientn.:] list, select [] or [].
In the [Orientation:] list, select [/], [/], [/], or [/].
If you placed originals on ARDF, select [1 Sided], [2 Sided(Top to Top)], or [2 Sided(Top to Bottom)] in the [Scan Settings:] list.

Basic Network TWAIN Scanner Procedure