Skip headerimage
ManualsContentsPreviousNextHelp

Basic Network TWAIN Scanner Procedure

This section explains the basic procedure for scanning with the network TWAIN scanner.

Important

The following procedure uses Windows XP and DeskTopBinder Lite by way of example.

  1. On the [Start] menu, point to [All Programs], point to [DeskTopBinder], and then click [DeskTopBinder].

  2. On the [Tools] menu, click [Scanner Settings...].

  3. Click [Select Scanner Driver...].

  4. Select the name of the machine you want to use in the list, and then click [Select].

  5. Click [OK].

  6. Place originals.

  7. On the [File] menu, point to [Add Document], and then click [Scan...] to display the Scanner Control dialog box.

    The Scanner Control dialog box and DeskTopBinder viewer will appear.

    A dialog box that is used to control a scanner using the TWAIN driver is referred to as the Scanner Control dialog box.

  8. Make settings for the type of original, type of scanning, and orientation of the original, etc.

    For details, see the TWAIN driver Help.

  9. In the Scanner Control dialog box, click [Scan].

    Depending on the security setting, if you press [Scan], a dialog box for entering the user name and password may appear.

    If there are more originals to be scanned, place the next original, and then click [Continue].

    If there are no more originals to be scanned, click [Complete].

  10. On the [File] menu of the DeskTopBinder viewer, click [Exit].

  11. Enter the file name, and then click [OK].

    The DeskTopBinder viewer closes and the image is stored in DeskTopBinder Lite.

Note