Skip headerimage
ManualsContentsPreviousNextHelp

Changing the User Parameters

This section describes how to set parameters.

Important

  1. Select [Fax Features] using [Up arrow key] or [Down arrow key], and then press the [OK] key.

    Operation panel screen illustration

  2. Select [Administrator Tools] using [Up arrow key] or [Down arrow key], and then press the [OK] key.

    Operation panel screen illustration

  3. Select [Parameter Setting] using [Up arrow key] or [Down arrow key], and then press the [OK] key.

    Operation panel screen illustration

  4. Select [Parameter Setting] using [Up arrow key] or [Down arrow key], and then press the [OK] key.

    Operation panel screen illustration

  5. Select the switch number you want to change using the scroll keys, and then press the [OK] key.

    Operation panel screen illustration

  6. Select the bit number you want to change.

    Operation panel screen illustration

    When the bit number is pressed, the current value switches between 1 and 0.

    Repeat step 6 to change another bit number for the same switch.

  7. Press the [OK] key.

    Operation panel screen illustration

  8. Repeat steps 5 through 7 to change the switch settings.

  9. After all the settings are finished, press the [User Tools/Counter] key.

    Operation panel screen illustration

Note

Reference