Routing e-mail received via SMTP

E-mail received via SMTP can be routed to other fax machines.

Illustration of routing e-mail received via SMTP

Before routing e-mail received via SMTP, you first must set "SMTP RX File Delivery" to "On" in the Fax Features menu. See "E-mail Settings".
Depending on security settings, this function may not be available.

The originator can request transfer of e-mail sent to another fax machine by specifying the e-mail address as follows:

Fax Number

fax=destination fax number@host name of this machine. domain name

Example: to transfer to fax number 212-123-4567, specify:

fax=2121234567@abc.company.com

Single destination programmed in the Quick Dial Keys

fax=registration number of 3 digits or less@host name of this machine.domain name

Example: to transfer to the destination number 001:

fax=001@abc.company.com

Group destination programmed in the destination list

fax=registration number of 3 digits or less@host name of this machine.domain name

Example: to transfer to the destination programmed under group number 004:

fax=004@abc.company.com

E-mail received via SMTP can also be routed to single or group destinations programmed in the destination list.
If an e-mail transfer request is received when the "SMTP RX File Delivery" is "Off" in the Fax Features menu, this machine responds with an error message to the SMTP server.
You can make settings that limit transfer to specified originators.
Using this function, you can also send documents from your e-mail application to e-mail addresses and G3 fax machines' destinations through this machine simultaneously.
For the maximum number of destinations you can program in a group, see "Maximum Values".
The Fax Features menu provides a user parameter setting (switch 32, bit 0) that allows you to select a priority order for alternative destinations for sent documents. When this parameter is set, if the specified receiver is a group destination that includes an address not registered for the specified transmission type, the document is routed to an alternative destination. See "Parameter Settings".