Skip headerimage
ManualsContentsPreviousNextHelp

Entering the Subject

Allows you to enter a subject for the e-mail document you want to send.

  1. Place the original, and then select the scan settings you require.

  2. Press [TX Mode].

    Operation panel screen illustration

  3. Select [E-mail Options] using [Up arrow key] or [Down arrow key], and then press the [OK] key.

    Operation panel screen illustration

  4. Select [Attach Subject] using [Up arrow key] or [Down arrow key], and then press the [OK] key.

    Operation panel screen illustration

  5. Enter the subject line, and then press the [OK] key.

    Operation panel screen illustration

    Depending on the type of characters to enter, press the [Shift] key to switch the mode.

    The screen returns to that of step 4.

  6. Press the [Escape] key twice.

    The standby screen returns.

    To check the settings, press [TX Mode].

  7. Specify a destination.

  8. Specify the sender.

    For details, see "Sender Settings".

  9. Press the [Start] key.

Note

Reference