Skip headerimage
ManualsContentsPreviousNextHelp

Sending originals using the exposure glass (Memory Transmission)

This section explains how to send originals by Memory Transmission using the exposure glass.

  1. Make sure that Memory Trans. indicator lights.

  2. Place the first page of the original face down on the exposure glass.

  3. Specify a destination.

    Operation panel screen illustration

  4. Make the scan settings you require.

  5. Press the [Start] key.

    The machine starts scanning.

  6. Place the next original on the exposure glass within 60 seconds when you send multiple originals, and then repeat steps 4 and 5.

    Repeat this step for each page.

    Operation panel screen illustration

  7. Press the [Sharp] key.

    The machine dials the destination and starts transmission.