Home Position Parameter List
For details about setting parameters, see “Parameter Settings”.
Do not change switches other than those listed.
Switch: 00, Bit: 3, 2, 1
Allows one of five image density steps to be set as the home position.
000: Normal density
001: The lightest density
010: The darkest density
101: Lighter density
110: Darker density
Switch: 00, Bit: 5, 4
Allows Standard, Details, or Fine to be set as the home position.
00: Standard
01: Detail
10: Fine
Switch: 01, Bit: 1, 0
Allows Text or Photo to be set as the home position.
00: Text
01: Photo
Switch: 02, Bit: 1
Allows either Immediate Transmission or Memory Transmission to be set as the home position.
0: Memory transmission
1: Immediate transmission
Switch: 02, Bit: 2
Allows the label insertion as the home position to be set to on or off.
0: Off
1: On
Switch: 02, Bit: 6, 5
Allows the fax header as the home position to be set to on or off.
00: Off
01: On
