Copying onto OHP Transparencies

When copying onto OHP transparencies, select the type and size of paper.

OHP transparencies must be loaded face down in the tray.
Load OHP transparencies one at time in the bypass tray. This prevents multiple sheets being fed in together, which can cause jams and misprints.
Remove copied sheets one by one.

Insert the OHP transparencies face down on the bypass tray.
Press the [] key.
Select [Paper Type] using [] or [], and then press the [OK] key.
Select [OHP (Transparency)] using [] or [], and then press the [OK] key.
The "Programmed" message appears.
Select the paper size, if required.
Place the originals, and then press the [Start] key.
When the copy job is finished, press the [Clear Modes] key to clear the settings.