Copying onto Custom Size Paper

Makes copies onto custom size paper from the bypass tray.

Insert the paper face down on the bypass tray.
Press the [] key.
Select [Paper Size] using [] or [], and then press the [OK] key.
Select [Custom Size] using [] or [], and then press the [OK] key.
Enter the horizontal size of the paper (Horiz.) with the number keys, and then press the [OK] key.
Enter the vertical size of the paper (Vert.) with the number keys, and then press the [OK] key.
The "Programmed" message appears.
Place the originals, and then press the [Start] key.
When the copy job is finished, press the [Clear Modes] key to clear the settings.

To change the value you entered, press the [Clear/Stop] key, and then enter a new value.