Custom sizes

When placing a custom size original on the exposure glass or in the ADF, specify the size of the original using the number keys.

Original sizes that can be set with this function are:
- ADF: vertical 139-216 mm (5.5-8.5 inches), horizontal for 1-sided originals 139-1260 mm (5.5-49.6 inches), horizontal for 2-sided originals 160-356 mm (6.3-14 inches)
- Exposure glass: vertical 139-216 mm (5.5-8.5 inches), horizontal 160-356 mm (6.3-14 inches)

Select the bypass tray using [] or [].
Press the [] key.
Select [Original Size] using [] or [], and then press the [OK] key.
Select [Custom Size] using [] or [], and then press the [OK] key.
Enter the horizontal size of the original (Horiz.) with the number keys, and then press the [OK] key.
Enter the vertical size of the original (Vert.) with the number keys, and then press the [OK] key.
The "Programmed" message appears.
When the custom size originals settings are registered, appears on the top of the copy display.

To change the value you entered, press the [Clear/Stop] key, and then enter a new value.
To cancel the size you have set, press the [Clear Modes] key.