Skip headerimage
ManualsContentsPreviousNextHelp

Top Page > Hardware Guide > Removing Misfed Paper > Paper Misfeed Message (R) > When the Booklet Finisher is Installed > When R7, R8, R9, R10, or R11 is displayed.

When R7, R8, R9, R10, or R11 is displayed.

CAUTION

  1. Open the front cover of the finisher.

    Booklet finisher illustration

  2. Holding the R7 lever, pull out the staple unit.

    Booklet finisher illustration

  3. Pull the R8 lever and remove the paper.

    Booklet finisher illustration

  4. Return the R8 lever to its original position.

  5. Turn the R9 lever clockwise.

    Booklet finisher illustration

  6. Turn the R10 lever clockwise.

    Booklet finisher illustration

  7. Push the R11 lever outward to remove the paper.

    Booklet finisher illustration

  8. Return the R11 lever and reinstall the staple unit in.

  9. Close the front cover of the finisher.

TopPreviousNext
Copyright (C) 2008