Skip headerimage
ManualsContentsPreviousNextHelp

Top Page > Hardware Guide > Removing Misfed Paper > Paper Misfeed Message (R) > When the Booklet Finisher is Installed > When R1, R2, or R3 is displayed.

When R1, R2, or R3 is displayed.

  1. Open the top cover of the finisher.

    Booklet finisher illustration

  2. Raise the R1 lever and remove the paper.

    Booklet finisher illustration

  3. Return the R1 lever to its original position and close the top cover.

  4. If the paper could not be removed, open the front cover of the finisher.

    Booklet finisher illustration

  5. Raise the R2 lever.

    Booklet finisher illustration

  6. Turn the R3 knob counterclockwise to remove the paper.

    Booklet finisher illustration

  7. Return the R2 lever to its original position.

  8. If the paper could not be removed, open the left cover of the bridge unit, and then turn the R3 knob clockwise to remove the paper.

    Booklet finisher illustration

  9. Close the left cover of the bridge unit and top cover of the finisher.

TopPreviousNext
Copyright (C) 2008