Skip header
 

Replacing the Waste Toner Bottle

WARNING

  • Do not incinerate spilled or used toner. Toner dust is flammable and might ignite when exposed to an open flame.

  • Dispose of used toner containers in accordance with local regulations.

CAUTION

  • Keep toner (used or unused) and the toner containers out of reach of children. If a child swallows toner, consult a doctor immediately.

Important

  • Waste toner bottles cannot be reused.

  • Purchasing and storing extra waste toner bottles is recommended.

  • Before removing the waste toner bottle from the printer, spread paper or some other material around the area to keep toner from dirtying your workspace.

Replace the waste toner bottle if the following message appears on the display:

Operation panel screen illustration

When the following message appears on the display, the waste toner bottle should be replaced soon. Prepare a new waste toner bottle.

Operation panel screen illustration

1Turn off the printer and unplug the power cable.

2Pull out Tray 1 carefully until it stops.

Paper tray illustration

3Open the left front cover slowly.

Waste toner bottle illustration

4Holding the green grip located under the front of the waste toner bottle, and pull it out until the handle on the top is completely visible.

Waste toner bottle illustration

5Holding the handle, carefully pull out the waste toner bottle horizontally.

Waste toner bottle illustration

6Put the waste toner bottle into the supplied plastic bag to prevent toner from leaking out of the bottle. Then, seal the bag.

7Take the new waste toner bottle out of the box.

Waste toner bottle illustration

8Remove the tape slowly.

Waste toner bottle illustration

9Slowly pull the thick paper out of the waste toner bottle vertically.

Waste toner bottle illustration

10Holding the handle on the top, insert the waste toner bottle into the printer carefully.

Waste toner bottle illustration

11When the waste toner bottle is inserted to the handle area, push the front side of the waste bottle to fully insert it into the printer.

Waste toner bottle illustration

12Carefully close the left front cover.

Paper tray illustration

13Carefully push Tray 1 into the printer until it stops.

14Plug in the power cable and turn on the printer.