Using the Standard TCP/IP port

Installing the PCL/RPCS Printer Drivers

1. Quit all applications currently running.

2. Insert the CD-ROM into the CD-ROM drive.

   The installer starts.

3. Select an interface language, and then click [OK].

   The default interface language is English.

4. Click [PCL/RPCS Printer Drivers].

5. The software license agreement appears in the [License Agreement] dialog box.

   After reading the agreement, click [I accept the agreement.], and then click [Next >].

6. Select a printer driver you want to use in the [Select Program] dialog box.

   You can select several printer drivers.

7. Click [Next >].

8. Select the printer model you want to use.

   The printer name can be changed in the [Change settings for 'Printer Name' ] box.

9. Double-click the printer name to display the printer settings.

   The details shown in [Comment], [Driver], and [Port] vary depending on the operating system, printer model, and port.

10. Click [Port], and then click [Add].

11. Click [Standard TCP/IP Port], and then click [OK].

    Configure the Standard TCP/IP port settings. See Windows Help if [Standard TCP/IP Port] does not appear.

12. Click [Next >] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.

13. Enter the printer name or IP address in the [Printer Name or IP Address] box.

    The [Port Name] text box automatically obtains a port name. Change this name if necessary.

    When the device selection appears, select "RICOH NetworkPrinter Driver C Model".

14. Click [Next >].

15. Click [Finish] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.

    The installation start dialog box reappears.

16. Check that the port of the selected printer is displayed in [Port].

17. Configure the default printer as necessary.

18. Click [Continue].

    The printer driver installation starts.

19. After the installation is completed, select one of the options to restart the computer either now or later, and then click [Finish].

    Restart the computer to complete the installation.

Installing the PostScript 3 Printer Driver

1. Quit all applications currently running.

2. Insert the CD-ROM into the CD-ROM drive.

   The installer starts.

3. Select an interface language, and then click [OK].

   The default interface language is English.

   The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian, Catala, Turkce.

4. Click [PostScript 3 Printer Driver].

   Add Printer Wizard starts.

   Step 5 does not apply for Windows Vista users.

5. Click [Next >].

6. Click [Local printer] or [Local printer attached to this printer], and then click [Next >].

   If you are using Windows Vista, you do not need to click [Next >].

7. Click [Create a new port:].

8. Click [Standard TCP/IP Port], and then click [Next >].

   If you are using other than Windows 2000, [Standard TCP/IP Port] in [Create a new port].

9. Click [Next >] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.

10. Enter the printer name or IP address in the [Printer Name or IP Address] box.

    The [Port Name] text box automatically obtains a port name. Change this name if necessary.

    When screen for Device selection appears, select "RICOH NetworkPrinter Driver C Model".

11. Click [Next >].

12. Click [Finish] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.

13. Check that the name of the machine whose driver you want to install is selected, and then click [Next >].

14. Change the printer name if you want, and then click [Next >].

    Select the [Yes] check box to configure the printer as default.

    Step 15 does not apply for other than Windows 2000 users.

15. Click [Next >].

16. Specify whether or not to share the printer, and then click [Next >].

17. Specify whether or not to print a test page.

    If you are using other than Windows Vista, click [Next >].

18. Click [Finish].

    The printer driver installation starts.