Mainframe

Configuration:

Desktop

Print Process:

Laser beam scanning & Electrophotographic printing

Dualcomponent development

First Print Speed:

6.9 sec or less (A4, 8¹/₂×11)

Printing Speed:

Maximum 36 pages per minute (A4), 37 pages per minute (8¹/₂×11)

Resolution:

1,200 × 600 dpi (RPCS, PostScript 3, PCL 6)

600 × 600 dpi (RPCS, PostScript 3, PCL 5e/6)

300 × 300 dpi (RPCS, PostScript 3, PCL 5e)

Paper size:

See Supported Paper for Each Tray.

Paper Weight:

See Supported Paper for Each Tray.

Media Type:

See Types of Paper and Other Media.

Paper Output Capacity:

Standard 250 sheets (80 g/m², 20 lb.)

Paper Input Capacity:

Standard Paper Tray	500 sheets ^*1
Bypass Tray ^*2	100 sheets ^*1
Optional Paper Feed Unit	500 sheets × 2 ^*1
Optional Envelop Feeder Unit ^*3	60 sheets ^*1

^*1 Paper weight: 60 - 130 g/m² (16 - 34 lb.)

^*2 You can load up to 10 envelopes (55 - 157 g/m², 14 - 42 lb.) at the same time.

^*3 To use the envelope feeder unit, the optional paper feed unit is required. The paper tray of the feed unit can be replaced with the envelope feeder unit. For more information about envelopes, see Types of Paper and Other Media.

Power Source:

220 - 240 V, 4.3 A or more, 50/60 Hz

120 V, 8 A or more, 60 Hz

Power Consumption:

	Mainframe	With full options
Printing	970 W or less	990 W or less
Energy Saver	4.5 W or less	10 W or less

	Mainframe	With full options
Printing	930 W or less	960 W or less
Energy Saver	4.5 W or less	10 W or less

Dimensions:

	Width	Depth	Height
Printer only (Bypass Tray not extended)	388 mm (15.2 ")	450 mm (17.7 ")	345 mm (13.6 ")
Printer only (Bypass Tray extended)	388 mm (15.2 ")	508 mm (20.0 ")	345 mm (13.6 ")
Printer with paper feed unit (one optional)	388 mm (15.2 ")	450 mm (17.7 ")	477 mm (18.8 ")
Printer with two optional paper feed unit	388 mm (15.2 ")	450 mm (17.7 ")	609 mm (24.0 ")

Weight:

Approximately 17.5 kg (38.6 lb) (power cord included)

Noise Emission ^*1 :

Sound Power Level : Main frame only

Stand-by	42 dB (A)
During Printing	67 dB (A)

Sound Pressure level : Main frame only ^*2

Stand-by	36 dB (A)
During Printing	61 dB (A)

^*1 The preceding measurements made in accordance with ISO7779 are actual values.

^*2 Measured at the position of a bystander.

Memory:

Standard 256 MB, up to 512 MB (with the optional Memory Unit)

Interface:

Standard:

Ethernet (10BASE-T/100BASE-TX)
USB 2.0, USB Host
To use USB 2.0, a USB computer port and cable that support USB 2.0 are required.

Optional:

Wireless LAN (IEEE 802.11a/b/g)
Gigabit Ethernet (1000BASE-T)
Parallel (Bidirectional IEEE1284)

Printer Language:

RPCS, PCL 5e/6, PostScript Level 3, PDF

Fonts:

PCL 5e/6

Monotype Imaging 35 Intellifonts, 10 TrueType fonts, 13 International fonts, and 1 Bitmap font.

PostScript 3, PDF

80 fonts (Type 2:24, Type 14:112)

If the printer has not been used for a while, there may be a short delay before the first page starts printing.
Continuous printing on sheets with a width of 170 mm or smaller may decrease the printing speed depending on the temperature control of the fusing unit.