Skip header
ManualsContentsPreviousNextHelp

Top Page > Hardware Guide > Replacing Consumables and Maintenance Kit > Replacing the Maintenance Kit > Before Replacing

Before Replacing

Replace all the parts included in Maintenance Kit at the same time. Replace them according to the following procedure.

  1. Turn off the power, and then unplug the power cable.

  2. Check the box contains the following items:

    Maintenance kit illustration

    1. Friction Pad × 3

      See "Replacing the Friction Pad".

    2. Transfer Roller (with gloves)

      See "Replacing the Transfer Roller".

    3. Paper Feed Roller × 3

      See "Replacing the Paper Feed Roller".

    4. Fusing Unit

      See "Replacing the Fusing Unit".

Reference

TopPreviousNext
Copyright (C) 2008