The Screen in Copier Mode

This section provides information about the screen when the machine is in copier mode.

With the Type 1 model, the functions that require an ADF cannot be used.

By default, the display shows the copier screen when the machine is turned on. If the scanner or fax screen is shown on the display, press the [Copy] key on the control panel to switch to the copier screen.

Screen in standby mode

Ready A4 100% Mixed 01

First line:
Shows the current status of the machine and current paper size.
Second line:
Shows the current reduction or enlargement ratio, copy quality, and number of copies.

The start-up mode can be specified in the [Default Mode] setting under [Admin Settings].

For details about [Default Mode], see Administrator Settings.