ManualsContentsPreviousNext |
This section describes the user tools in the Edit menu under Copier / Document Server Features.
Default settings are shown in bold type.
Adjust Position
Specify the default setting for Print Position Adjustment.
The default setting is Bottom: 20 mm / Right: 20 mm (Metric version) / Bottom: 0.8" / Right: 0.8" (Inch version)
Metric version: 0 to 200 mm (1 mm increments)
Inch version: 0 to 7.9" (0.1" increments)
Erase Border Width
Specify the width of erased border margins using this function.
The default setting is 10 mm (Metric version) / 0.4" (Inch version).
Erase Original Shadow in Combine
In Combine mode, you can specify whether to erase a 3 mm, 0.1" boundary margin around all four edges of each original.
The default setting is On.
Image Repeat Separation Line
You can select a separation line using the Image Repeat function from: None, Solid, Broken A, Broken B, or Crop Marks.
None
Solid
Broken A
Broken B
Crop Marks
The default setting is None.
Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06") in width along the separation line.
Double Copies Separation Line
You can select a separation line using the Double Copies function from: None, Solid, Broken A, Broken B, or Crop Marks.
None
Solid
Broken A
Broken B
Crop Marks
The default setting is None.
Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06") in width along the separation line.
Separation Line in Combine
You can select a separation line using the Combine function from: None, Solid, Broken A, Broken B, or Crop Marks.
None
Solid
Broken A
Broken B
Crop Marks
The default setting is None.
Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06") in width along the separation line.
Copy Order in Combine
You can set the copy order in Combine mode to Left to Right or Top to Bottom.
The default setting is From Left to Right.
Program / Delete Format
Store a format (background) image for use with Format Overlay. You can store up to four formats. See "Program/Delete Overlay Format".
Margin Adjustment Priority
Specify the default setting for the margin size.
You can set the top and bottom margin size.
The default setting is Top: 20 mm, Bottom: 20 mm (Metric version) / Top: 0.8", Bottom: 0.8" (Inch version).
The size can be set as follows:
Meric version: 0 to 200 mm (1 mm increments)
Inch version: 0.0" to 7.9" (0.1" increments)
Partial Copy Size
Specify the default settings of the start position (Y1) and the copy size (Y2).
The default setting is Y1: 0 mm, Y2: 210 mm (Metric version) / Y1: 0.0", Y2: 8.3" (Inch version).
The size can be set as follows:
Type 1
Metric version: Y1: 0 mm to 14,790 mm (1 mm increments), Y2: 210 mm to 15,000 mm (1 mm increments)
Inch version: Y1: 0.0" to 582.2" (0.1" increments), Y2: 8.3" to 590.5" (0.1" increments)
Type 2
Metric version: Y1: 0 mm to 29,790 mm (1 mm increments), Y2: 210 mm to 30,000 mm (1 mm increments)
Inch version: Y1: 0.0" to 1172.8" (0.1" increments), Y2: 8.3" to 1181.1" (0.1" increments)