General Features

You can set whether Auto Image Density is "On" or "Off" when the machine is turned on, reset, or modes are cleared.

The default setting for "Text" is On.

The default setting for "Drawing" is On.

The default setting for "Text / Photo" is On.

The default setting for "Photo" is Off.

The default setting for "Background Lines" is On.

The default setting for "Patched Original" is On.

The default setting for "Generation Copy" is On.

When you select "Text / Photo" or "Photo" in "Original Type Priority", you can change the settings of the selected original type.

The default setting for "Text / Photo" is Printed Photo.

The default setting for "Photo" is Printed Photo.

The maximum copy quantity can be set between 1 and 99.

The default setting is 99 sheet(s).

If you load paper of the same size in two or more trays, the machine automatically shifts to the other when the first tray runs out of paper (when Auto Paper Select is selected). This function is called "Auto Tray Switching". This setting specifies whether to use Auto Tray Switching or not.

The default setting is With Image Rotation.

• With Image Rotation

  Use to copy when using the Auto Tray Switching function.

• Without Image Rotation

  Only copies with Auto Tray Switching if you load paper of the same size and in the same orientation in two or more trays. If the paper is not the same size or in the same orientation, copying is interrupted and the message "Load paper." is displayed.

• Off

  When a paper tray runs out of paper, copying is interrupted and the message "Load paper." is displayed.

You can choose whether or not the beeper sounds when copying is complete.

The default setting is On.

If Panel Key Sound of User Tools (System Settings) settings is [On], the machine beeps to notify you that it did not complete a job for reasons such as copying was interrupted, the paper tray ran out of paper, or a paper jam occurred.