Adding Toner

This section describes how to add and store toner.

Do not incinerate used toner or toner containers. Toner dust might ignite when exposed to an open flame. Dispose of used toner containers in accordance with local regulations.

If toner or used toner is inhaled, gargle with plenty of water and move into a fresh air environment. Consult a doctor if necessary.

If toner or used toner gets into your eyes, flush immediately with large amounts of water. Consult a doctor if necessary.

If toner or used toner is swallowed, dilute by drinking a large amount of water. Consult a doctor if necessary.

Avoid getting toner on your clothes or skin when removing a paper jam or replacing toner. If your skin comes into contact with toner, wash the affected area thoroughly with soap and water.
If toner gets on your clothing, wash with cold water. Hot water will set the toner into the fabric and may make removing the stain impossible.

Do not open toner containers forcefully. Toner can spill, dirtying your clothes or hands, and possibly resulting in accidental ingestion.

Fault may occur if you use toner other than the recommended type.
When adding toner, do not turn off the operation switch. If you do, settings will be lost.
Always add toner when the machine instructs you.
When a message "Add Toner" is shown on the display, replace the applicable toner.
Do not repeatedly install and remove toner cartridges. This will result in toner leakage.
Do not shake the removed toner cartridge. Remaining toner might scatter.
Store toner containers in a cool, dry place free from direct sunlight.
Store on a flat surface.

You can check name of the required toner name and the replacement procedure using the "Add Toner" screen.
Press [System Status] to check contact number where you can order supplies. See "Checking Machine Status and Settings".