



	Manuals Contents Previous Next

Top Page > Copy/Document Server Reference > Advanced Copying > Advanced Copier Functions > Erase Border (same width)

Erase Border (same width)

Erases the edge margin of the original image.

Illustration of Erase Border

The default erase border setting is 10 mm (0.4").

You cannot use the bypass tray with this function.

Press [Edit / Stamp].
Press [Erase].
Press [Erase Border].
Press [Same Width].
Set an erase border width with [] or [].
Pressing [] or [] changes the width in increments of 1 mm (0.1 inch).
Pressing and holding down the relevant key changes the width in increments of 10 mm (1 inch).
Press [OK] twice.

To change the value entered in step 5, press [] and [] to set a new value.
For details about the scan size limitations when using Erase Border together with the other functions, see Scan Size Limitations, by Function.