Setting Items of IEEE 802.1X for Ethernet

Log on to Web Image Monitor in the administrator mode.

Click [Configuration].

Select [IEEE 802.1X (WPA/WPA2)] in "Security" area.

In "User Name", enter the user name set in the RADIUS server.

Enter the domain name in "Domain Name".

Select "EAP Type". Configurations differ according to the EAP Type.

EAP-TLS

• Make the following settings according to the operating system you are using:

  • Select [On] or [Off] in "Authenticate Server Certificate".

  • Select [On] or [Off] in "Trust Intermediate Certificate Authority".

  • Enter the host name of the RADIUS server on "Server ID".

LEAP

• Click Change in "Password", and then enter the password set in the RADIUS server.

EAP-TTLS

• Click [Change] in "Password", and then enter the password set in the RADIUS server.

• Click [Change] in "Phase 2 User Name", and then enter the user name set in the RADIUS server.

• Select [CHAP], [MSCHAP], [MSCHAPv2], [PAP], or [MD5] in "Phase 2 Method".

• Certain methods might not be available, depending on the RADIUS server you want to use.

• Make the following settings according to the operating system you are using:

  • Select [On] or [Off] in "Authenticate Server Certificate".

  • Select [On] or [Off] in "Trust Intermediate Certificate Authority".

  • Enter the host name of the RADIUS server in "Server ID".

PEAP

• Click [Change] in "Password", and then enter the password set in the RADIUS server.

• Click [Change] on "Phase 2 User Name", and then enter the user name set in the RADIUS server.

• Select [MSCHAPv2] or TLS in "Phase 2 Method".

• When you select [TLS], select the client certificate you want to use in "IEEE 802.1X Client Certificate".

• Make the following settings according to the operating system you are using:

  • Select [On] or [Off] in "Authenticate Server Certificate".

  • Select [On] or [Off] in "Trust Intermediate Certificate Authority".

  • Enter the host name of the RADIUS server on "Server ID".

Click [OK].

Click [Configuration], and then click [Interface Settings] in the "Interface" area.

Select [Active] in "Ethernet Security".

Click [OK].

Click [Logout].

Quit the Web Image Monitor.