Skip header
ManualsContentsPreviousNextHelp

Checking the Machine Status

Follow the procedure below to check machine status.

  1. Start SmartDeviceMonitor for Admin.

  2. On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX] or [IPv4 SNMPv3].

    A list of machines using the selected protocol appears.

    Select the protocol of the machine whose configuration you want to change.

    If you are using TCP/IP SNMP v3, enter the user authentication.

  3. Click the [View] menu, and then click [Select List Columns].

  4. From [Device] in the [Select List Columns] dialog box, select the items you want to display, and then click [Add].

    Selected items will move to [Show].

  5. Move all the items you want to display, and then click [OK].

    An icon in the list indicates the machine's status.

  6. For information about a machine's status, select the machine you want to know about, and then click [Open] in the [Device Settings] menu.

    The dialog box of the selected machine appears.

  7. Click the application whose status you want to view.

    The machine's status is displayed.

  8. Quit SmartDeviceMonitor for Admin.

Note