Skip headerimage

Fax Header Print

When the Fax Header is set to on, the stored name is printed on the receiver's paper.

You can store two Fax Headers; "First Name" and "Second Name".

For example, if you store your department name in one and your organization name in the other, you could use the first when sending internal faxes and the second for external faxes.


  1. Place the original, and then select the scan settings you require.

  2. Press [TX Mode].

    Operation panel screen illustration

  3. Select [Option Setting].

  4. Make sure that [Fax Header Print] is highlighted.

    Operation panel screen illustration

  5. Press [OK] twice.

  6. Specify the destination, and then press the [Start] key.