Skip headerimage
ManualsContentsPreviousNextHelp

General Settings

This section describes the user tools in the General Settings menu under Facsimile Features.

Quick Operation Key (1-3)

Frequently used functions programmed as Quick Operation keys are shown on the menu immediately after the power is turned on.

If [On] is selected, the Quick Operation keys can be programmed with the following items:

  • On

    • Manual E-mail RX

    • Send Later

    • Subject

    • Text

    • Recept. Notice

    • E-mail TX Results

    • BCC transmission

    • Std. Message

    • Fax Header Print

    • Label Insertion

    • Closed Network

    • SUB Code TX

    • SEP Code Reception

    • Stamp

    • Print Memory Lock

    • TX File Status

    • RX File Status

    • Journal

    • Print Stored RX File

    • TX Status Report

    • Forwarding

    • Switch RX Mode

  • Off

Up to three functions can be programmed to Quick Operation keys.

Functions that appear dimmed have already been set.

The default setting for Quick Operation key 1 has not been set.

The default setting for Quick Operation key 2 is TX File Status.

The default setting for Quick Operation key 3 is RX File Status.

Switch Title

Select the title to be shown on the destination list.

The default setting is Title 1.

Search Destination

Select a destination list to be used in "Search Destination".

You can select from the Address Book, or a registered LDAP Server.

To search from an LDAP server, it is necessary to register the LDAP server in [System Settings] and set [LDAP Search] to [On].

The default setting is Address Book.

For details about "LDAP Search", see "System Settings", Network and System Settings Guide.

Communication Page Count

Checks the transmission and reception, and totals on the display.

  • Pages Sent:

    Total number of transmitted pages

  • Pages Received:

    Total number of received pages

  1. Press [Facsimile Features].

  2. Press [General Settings].

  3. Press [Communication Page Count].

  4. After checking the display, press [Exit].

  5. Press the [User Tools/Counter] key.

Adjust Sound Volume

Adjust the sound volume during On Hook Mode and Immediate Transmission.

The default setting for sound volume is level 2.

Box Setting

The following functions are for delivery and transfer of documents:

  • Personal Box

  • Information Box

  • Transfer Box

For details about Box Setting, see "Box Settings".

Box Setting: Print List

You can print a list of the currently registered Personal Boxes, Information Boxes, and Transfer Boxes.

On Hook Mode Release Time

Use this function to specify a time to cancel On Hook mode after you transmit using On Hook dialing.

The default setting is 3 minutes.

Reference