Page Numbering

You can select the page number format given priority when [Page Numbering] is pressed.

The default setting is P1, P2....

You can select the page number printed in Page Numbering mode.

The default setting is Font 1.

You can set the size of the stamp printed in Page Numbering mode.

The default setting is Auto.

You can set the position of the duplex back page number printed in Duplex mode.

The default setting is Opposite Position.

You can set page numbering when using the Combine function and the Page Numbering function together.

The default setting is Per Original.

You can select to print the page number onto slip sheets when using the Designate function set to "Copy" and the Page Numbering function together.

The default setting is Off.

Specify how each of stamp is printed.

• Stamp Position

  Specify where to print the stamp.

  The default setting is Top Right.

• Adjust Stamp Position

  You can adjust the position of the stamp within the available ranges shown below.

  • Metric version:

    "Top Left"-T/B: 4-144mm, L/R: 4-144mm

    "Top Center"-T/B: 4-144mm, L/R: 72-72mm

    "Top Right"-T/B: 4-144mm, L/R: 4-144mm

    "Bottom Left"-T/B: 4-144mm, L/R: 4-144mm

    "Bottom Center"-T/B: 4-144mm, L/R: 72-72mm

    "Bottom Right"-T/B: 4-144mm, L/R: 4-144mm

  • Inch version:

    "Top Left"-T/B: 0.1"-5.7", L/R: 0.1"-5.7"

    "Top Center"-T/B: 0.1"-5.7", L/R: 2.8"-2.8"

    "Top Right"-T/B: 0.1"-5.7", L/R: 0.1"-5.7"

    "Bottom Left"-T/B: 0.1"-5.7", L/R: 0.1"-5.7"

    "Bottom Center"-T/B: 0.1"-5.7", L/R: 2.8"-2.8"

    "Bottom Right"-T/B: 0.1"-5.7", L/R: 0.1"-5.7"

You can have page numbers printed in white when they overlap black parts of the image.

The default setting is Off.

Sets the selected priority color when printing the page number.

The default setting is Black.

You can select the page numbering initial letter between “P1, P2.../P.1, P.2...” and “S1, S2.../S.1, S.2...”.

The default setting is P1,P2.../P.1,P.2....