Skip header
 

Date Stamp

This section describes the user tools in the Date Stamp menu under Stamp.

Format

You can select the date format for Date Stamp mode.

The default setting is DD / MM / YYYY (Metric version) / MM / DD / YYYY (Inch version).

Font

You can select the Date Stamp font.

The default setting is Font 1.

Size

You can set the Date Stamp size.

The default setting is Auto.

Superimpose

You can have the Date Stamp printed in white when it overlaps black parts of the image.

The default setting is Off.

Stamp Color

Sets the selected priority color when printing the date.

The default setting is Black.

Stamp Setting

Specify how Date Stamp is printed.

  • Stamp Position

    Specify where to print the Date Stamp.

    The default setting is Top Left.

  • Adjust Stamp Position

    You can adjust the position of the Date Stamp within the available ranges shown below.

    • Metric version:

      "Top Left"-T/B: 4-144mm, L/R: 4-144mm

      "Top Center"-T/B: 4-144mm, L/R: 72-72mm

      "Top Right"-T/B: 4-144mm, L/R: 4-144mm

      "Bottom Left"-T/B: 4-144mm, L/R: 4-144mm

      "Bottom Center"-T/B: 4-144mm, L/R: 72-72mm

      "Bottom Right"-T/B: 4-144mm, L/R: 4-144mm

    • Inch version:

      "Top Left"-T/B: 0.1"-5.7", L/R: 0.1"-5.7"

      "Top Center"-T/B: 0.1"-5.7", L/R: 2.8"-2.8"

      "Top Right"-T/B: 0.1"-5.7", L/R: 0.1"-5.7"

      "Bottom Left"-T/B: 0.1"-5.7", L/R: 0.1"-5.7"

      "Bottom Center"-T/B: 0.1"-5.7", L/R: 2.8"-2.8"

      "Bottom Right"-T/B: 0.1"-5.7", L/R: 0.1"-5.7"

  • Page to Stamp

    Sets whether to print the stamp on all pages or only the first page.

    The default setting is All Pages.