General Features
This section describes the user tools in the General Features menu under Copier / Document Server Features.
Default settings are shown in bold type.
Auto Image Density Priority
You can set whether Auto Image Density is "On" or "Off" when the machine is turned on, reset, or modes are cleared.
The default setting for "Full Color: Photo" is Off.
The default setting for "Full Color: Non-photo" is Off.
The default setting for "B&W: Photo" is Off.
The default setting for "B&W: Non-photo" is On.
Original Type Priority
You can select the original type effective when the power is turned on, or modes cleared.
The default setting for "Full Color" is Text / Photo.
The default setting for "B&W" is Text / Photo.
Original Photo Type Priority
When you select "Text / Photo" or "Photo" in "Original Type Priority", you can change the settings of the selected original type.
The default setting for "Text / Photo" is Printed Photo.
The default setting for "Photo" is Printed Photo.
Original Type Display
You can have the original types shown on the initial display.
The default setting is Display.
If you select [Hide], the display is as below.
Paper Display
Choose to have the available paper trays and sizes shown on the initial display.
The default setting is Display.
If you select [Hide], the display is shown as below. Press [Auto Paper Select] to display paper sizes.
Original Orientation in Duplex Mode
Set the original orientation when making two-sided copies.
The default setting is Top to Top.
Copy Orientation in Duplex Mode
Set the copy orientation when making two-sided copies.
The default setting is Top to Top.
Max. Copy Quantity
The maximum copy quantity can be set between 1 and 999.
The default setting is 999 sheet(s).
Auto Tray Switching
If you load paper of the same size in two or more trays, the machine automatically shifts to the other when the first tray runs out of paper (when Auto Paper Select is selected). This function is called "Auto Tray Switching". This setting specifies whether to use Auto Tray Switching or not.
The default setting is With Image Rotation.
With Image Rotation
Use to copy when using the Auto Tray Switching function.
Without Image Rotation
Only copies with Auto Tray Switching if you load paper of the same size and in the same orientation in two or more trays. If the paper is not the same size or in the same orientation, copying is interrupted and the message "Load paper." is displayed.
Off
When a paper tray runs out of paper, copying is interrupted and the message "Load paper." is displayed.
Alert Sound: Original left on Exposure Glass
The beeper (Key tone) sounds if you forget to remove originals after copying.
The default setting is On.
If Panel Key Sound of General Features (System Settings) is [Off], the beeper does not sound irrespective of the "Alert Sound: Original left on Exposure Glass".
Job End Call
Choose whether or not the beeper sounds when copying is complete.
The default setting is On.
If Panel Key Sound of General Features (System Settings) is [On], the machine beeps to notify you that it did not complete a job for reasons such as copying was interrupted, the paper tray ran out of paper, or a paper jam occurred.
Customize Function: Copier
You can assign up to six frequently-used functions to Copy Function keys.
The default setting for "Customize Function: Copier 1" is 1 sided 
2 sided:TtoT.
The default setting for "Customize Function: Copier 2" is 2 sided 2 sided.
The default setting for "Customize Function: Copier 3" is 1 sided Comb 2 orig.
The default setting for "Customize Function: Copier 4" is 1 sided Comb 4 orig.
The default setting for "Customize Function: Copier 5" is Create Margin.
The default setting for "Customize Function: Copier 6" has not been set.
Customize Function: Document Server Storage
You can assign up to six frequently-used functions for scanning documents on the Document Server Storage keys.
The default setting for "Customize Function: Document Server Storage 1" is 2 Sided Orig. Top to Top.
The default setting for "Customize Function: Document Server Storage 2" is 1 sided Comb 2 orig.
The default setting for "Customize Function: Document Server Storage 3" is 1 sided Comb 4 orig.
The default setting for "Customize Function: Document Server Storage 4" is 1 sided Comb 8 orig.
The default setting for "Customize Function: Document Server Storage 5" is Create Margin.
The default setting for "Customize Function: Document Server Storage 6" has not been set.
