Skip headerimage
ManualsContentsPreviousNextHelp

Page Numbering

This section describes the user tools in the Page Numbering menu under Stamp.

Stamp Format

You can select the page number format given priority when [Page Numbering] is pressed.

The default setting is P1, P2....

Font

You can select the page number printed in Page Numbering mode.

The default setting is Font 1.

Size

You can set the size of the stamp printed in Page Numbering mode.

The default setting is Auto.

Duplex Back Page Stamping Position

You can set the position of the duplex back page number printed in Duplex mode.

The default setting is Opposite Position.

Page Numbering in Combine

You can set page numbering when using the Combine function and the Page Numbering function together.

The default setting is Per Original.

Stamp on Designating Slip Sheet

You can select to print the page number onto slip sheets when using the Designate function set to "Copy" and the Page Numbering function together.

The default setting is Off.

Stamp Position

Specify how each of stamp is printed.

  • Stamp Position

    Specify where to print the stamp.

    The default setting is Top Right.

  • Adjust Stamp Position

    You can adjust the position of the stamp within the available ranges shown below.

    • Metric version:

      "Top Left"-T/B: 4-144mm, L/R: 4-144mm

      "Top Centre"-T/B: 4-144mm, L/R: 72-72mm

      "Top Right"-T/B: 4-144mm, L/R: 4-144mm

      "Bottom Left"-T/B: 4-144mm, L/R: 4-144mm

      "Bottom Centre"-T/B: 4-144mm, L/R: 72-72mm

      "Bottom Right"-T/B: 4-144mm, L/R: 4-144mm

    • Inch version:

      "Top Left"-T/B: 0.1"-5.7", L/R: 0.1"-5.7"

      "Top Centre"-T/B: 0.1"-5.7", L/R: 2.8"-2.8"

      "Top Right"-T/B: 0.1"-5.7", L/R: 0.1"-5.7"

      "Bottom Left"-T/B: 0.1"-5.7", L/R: 0.1"-5.7"

      "Bottom Centre"-T/B: 0.1"-5.7", L/R: 2.8"-2.8"

      "Bottom Right"-T/B: 0.1"-5.7", L/R: 0.1"-5.7"

Superimpose

You can have page numbers printed in white when they overlap black parts of the image.

The default setting is Off.

Stamp Colour

Sets the selected priority colour when printing the page number.

The default setting is Black.

Page Numbering Initial Letter

You can select the page numbering initial letter between "P1, P2.../P.1, P.2..." and "S1, S2.../S.1, S.2...".

The default setting is P1,P2.../P.1,P.2....