General Features

You can set whether Auto Image Density is "On" or "Off" when the machine is turned on, reset, or modes are cleared.

The default setting for "Full Colour: Photo" is Off.

The default setting for "Full Colour: Non-photo" is Off.

The default setting for "B&W: Photo" is Off.

The default setting for "B&W: Non-photo" is On.

You can select the original type effective when the power is turned on, or modes cleared.

The default setting for "Full Colour " is Text / Photo.

The default setting for "B&W " is Text / Photo.

When you select "Text / Photo" or "Photo" in "Original Type Priority", you can change the settings of the selected original type.

The default setting for "Text / Photo" is Printed Photo.

The default setting for "Photo" is Printed Photo.

You can have the original types shown on the initial display.

The default setting is Display.

If you select [Hide], the display is as below.

Choose to have the available paper trays and sizes shown on the initial display.

The default setting is Display.

If you select [Hide], the display is shown as below. Press [Auto Paper Select] to display paper sizes.

Set the original orientation when making two-sided copies.

The default setting is Top to Top.

Set the copy orientation when making two-sided copies.

The default setting is Top to Top.

The maximum copy quantity can be set between 1 and 999.

The default setting is 999 sheet(s).

If you load paper of the same size in two or more trays, the machine automatically shifts to the other when the first tray runs out of paper (when Auto Paper Select is selected). This function is called "Auto Tray Switching". This setting specifies whether to use Auto Tray Switching or not.

The default setting is With Image Rotation.

• With Image Rotation

  Use to copy when using the Auto Tray Switching function.

• Without Image Rotation

  Only copies with Auto Tray Switching if you load paper of the same size and in the same orientation in two or more trays. If the paper is not the same size or in the same orientation, copying is interrupted and the message "Load paper." is displayed.

• Off

  When a paper tray runs out of paper, copying is interrupted and the message "Load paper." is displayed.

The beeper (Key tone) sounds if you forget to remove originals after copying.

The default setting is On.

If Panel Key Sound of General Features (System Settings) is [Off], the beeper does not sound irrespective of the "Alert Sound: Original left on Exposure Glass".

Choose whether or not the beeper sounds when copying is complete.

The default setting is On.

If Panel Key Sound of General Features (System Settings) is [On], the machine beeps to notify you that it did not complete a job for reasons such as copying was interrupted, the paper tray ran out of paper, or a paper jam occurred.

You can assign up to six frequently-used functions to Copy Function keys.

The default setting for "Customize Function: Copier 1" is 1 sided 2 sided:TtoT.

The default setting for "Customize Function: Copier 2" is 2 sided 2 sided.

The default setting for "Customize Function: Copier 3" is 1 sided Comb 2 orig.

The default setting for "Customize Function: Copier 4" is 1 sided Comb 4 orig.

The default setting for "Customize Function: Copier 5" is Create Margin.

The default setting for "Customize Function: Copier 6" has not been set.

You can assign up to six frequently-used functions for scanning documents on the Document Server Storage keys.

The default setting for "Customize Function: Document Server Storage 1" is 2 Sided Orig. Top to Top.

The default setting for "Customize Function: Document Server Storage 2" is 1 sided Comb 2 orig.

The default setting for "Customize Function: Document Server Storage 3" is 1 sided Comb 4 orig.

The default setting for "Customize Function: Document Server Storage 4" is 1 sided Comb 8 orig.

The default setting for "Customize Function: Document Server Storage 5" is Create Margin.

The default setting for "Customize Function: Document Server Storage 6" has not been set.