Cleaning the Registration Roller

The inside of this printer becomes very hot. Do not touch parts labelled "" (indicating a hot surface). Touching these parts will result in burns.

Do not use chemical cleaners or organic solvents such as thinners or benzine.
Do not touch the belt of the roller when cleaning.
Clean the registration roller if dots (caused by specks of paper stuck to the roller) appear on printed OHP transparencies.

Turn off the power, and then unplug the power cable.
Carefully open the printer's front cover (A) of by pulling left and right side levers.
Set the registration roller as shown.
Clean the registration roller by applying a soft damp cloth while turning it.
Carefully close the front cover (A).
Plug in the power cable, and then turn on the power.