Skip header
ManualsContentsPreviousNextHelp

Top Page > Hardware Guide > Connecting the Printer Cables > Ethernet Cable Connection > Reading the LED Lamps

Reading the LED Lamps

Standard Ethernet port

Standard ethernet port illustration

  1. Green: turns on when the printer is properly connected to the network.

  2. Yellow: turns on when 100BASE-TX is in use. It turns off when 10BASE-T is in use.

Optional Gigabit Ethernet board

Gigabit ethernet board illustration

  1. Yellow: turns on when 100BASE-TX is in use.

  2. Green: turns on when 10BASE-T is in use.

  3. Both the green and yellow lamps are lit when 1000BASE-T is in use.

TopPreviousNext
Copyright (C) 2007