Ethernet Configuration
Configure the following network settings according to the network interface you are using.You can use SmartDeviceMonitor for Admin or a Web browser to configure IP address-related settings in a TCP/IP-capable environment.
Configure the printer for the network using the control panel.
The following table shows the control panel settings and their default values. These items appear in the [Host Interface] menu.
Setting Name |
Default |
|---|---|
Machine IPv4 Address |
|
IPv6 Stateless Setting |
Active |
IP Sec |
Inactive |
NW Frame Type |
Auto Select |
Effective Protocol |
|
Ethernet Speed |
Auto Select |
IEEE802.1X Auth.(Ethernet) |
Inactive |
Restr.IEEE802.1X Auth.Def |
[Yes] or [No]. |
LAN Type |
Ethernet |
If DHCP is in use on your network, the IP address, subnet mask, and gateway address are all set automatically.
Configure these setting as necessary. See Software Guide for details.
