Skip header
 

Top Page > Hardware Guide > Guide to the Printer > Exterior: Front View

Exterior: Front View

This section explains names and functions of the parts on the front and right side of the printer.

Printer illustration numbered callout illustration

  1. Control Panel

    Contains keys for printer control and a display that shows the printer status.

  2. Front Cover

    Open the front cover to replace the fusing unit or transfer roller, or to remove jammed paper.

    The front cover can be opened in two ways:

    To replace the fusing unit or roller, pull the levers marked "A" on either side of the printer. To remove jammed paper, press the button marked "Z" on the right side of the printer.

  3. Bypass Tray

    Up to 100 sheets of plain paper can be loaded.

  4. Power Switch

    Use this switch to turn the power on and off.

  5. Tray 1

    Up to 550 sheets of plain paper can be loaded.

  6. Standard Tray

    Output is stacked here with the print side down.

  7. Top Cover

    Open this cover when replacing the toner.

  8. Front Cover (A) Open Levers

  9. Intake Port

  10. Ventilator

    Releases heat from internal components to prevent overheating. Malfunctions occur if the vent is blocked or obstructed.

    The dustproof filter needs to be replaced regularly for proper maintenance.

  11. Front Cover (Z) Open Button

Note

  • When setting paper larger than A5image, pull out the paper extender as shown.

    Printer illustration