Installing the PostScript 3 Printer Driver (Windows XP/Vista, Windows Server 2003/2003 R2 - TCP/IP)

Quit all applications currently running.

Insert the CD-ROM into the CD-ROM drive.

The installer starts.

Select an interface language, and then click [OK].

The default interface language is English.

Click [PostScript 3 Printer Driver].

Add Printer Wizard starts.

Step 5 does not apply for Windows Vista users.

Click [Next >].

Click [Local printer attached to this computer], and then click [Next >].

If the [Automatically detect and install Plug and Play Printer] check box is selected, clear it.

If you are using Windows Vista, you do not need to click [Next >].

Click [Create a new port:].

Click [SmartDeviceMonitor], and then click [Next >].

Click [TCP/IP], and then click [Search].

A list of printers using [TCP/IP] appears.

Select the printer you want to use, and then click [OK].

Only printers that respond to a broadcast from the computer appear. To use a printer not listed here, click [Specify Address], and then enter the IPv4 address or host name of the printer.

Check that the name of the printer whose driver you want to install is selected, and then click [Next >].

Change the printer name if you want, and then click [Next >].

Select the [Yes] check box to configure the printer as default.

Step 13 does not apply for Windows Vista users.

Specify whether or not to share the printer, and then click [Next >].

Specify whether or not to print a test page, and then click [Next >].

If you are using Windows Vista, you do not need to click [Next >].

Click [Finish].

The printer driver installation starts.