Installing the PostScript 3 Printer Driver (Windows 2000 - IPP)

Quit all applications currently running.

Insert the CD-ROM into the CD-ROM drive.

The installer starts.

Select an interface language, and then click [OK].

The default interface language is English.

Click [PostScript 3 Printer Driver].

Add Printer Wizard starts.

Click [Next >].

Click [Local printer], and then click [Next >].

If the [Automatically detect and install Plug and Play Printer] check box is selected, clear it.

Click [Create a new port:].

Click [SmartDeviceMonitor], and then click [Next >].

Click [IPP].

In the [Printer URL] box, enter "http://(printer's address)/printer" as the printer's address.

If the server authentification is issued, to enable SSL (a protocol for encrypted communication), enter "https://(printer's address)/printer" (Internet Explorer 5.01, or a higher version must be installed).

(example IPv4 address: 192.168.15.16)

http://192.168.15.16/printer

https://192.168.15.16/printer

You can enter "http://(printer's address)/ipp" as the printer's address.

Enter a name for identifying the printer in [IPP Port Name]. Use a name different from the name of any existing port.

If a name is not specified here, the address entered in the [Printer URL] box becomes the IPP port name.

Click [Detailed Settings] to make necessary settings, and then click [OK].

For information about the settings, see SmartDeviceMonitor for Client Help.

Click [OK].

Check that the name of the printer whose driver you want to install is selected, and then click [Next >].

Change the printer name if you want, and then click [Next >].

Select the [Yes] check box to configure the printer as default.

Specify whether or not to share the printer, and then click [Next >].

Specify whether or not to print a test page, and then click [Next >].

Click [Finish].

The printer driver installation starts.