Skip headerimage
ManualsContentsPreviousNextHelp

Top Page > Hardware Guide > Removing Misfed Paper > Paper Misfeed Message (R) > When the 2 Tray Finisher is Installed > When R1, R2, R3, or R4 is displayed.

When R1, R2, R3, or R4 is displayed.

  1. Open the front cover of the finisher.

    2 tray finisher illustration

  2. Turn lever R1 counterclockwise.

    2 tray finisher illustration

  3. Open lever R3.

    2 tray finisher illustration

  4. Turn lever R2 counterclockwise.

    2 tray finisher illustration

  5. Open the left cover of the bridge unit and remove the paper.

    Bridge unit illustration

  6. If the paper cannot be removed, open lever R3 and remove the paper.

    2 tray finisher illustration

  7. Raise lever R4 up and remove the paper.

    2 tray finisher illustration

  8. Return levers R3 and R4 to their original positions.

  9. Close the front cover of the finisher.

TopPreviousNext
Copyright (C) 2007