Skip header
 

Canceling a Print Job

Follow the procedure below to cancel a print job if the message prompting form feed appears.

1Press the [Printer] key.

The Printer screen appears.

2Press [Job Reset] or the [Clear/Stop] key.

Delete the stored print jobs, and then cancel form feed.

3Press [Reset the Job] to cancel the current print job, or [Reset All Jobs] to cancel all jobs.

A confirmation message appears.

4Press [Yes] to cancel the print job.

Press [No] to return to the previous display.

Note

  • To resume printing print jobs, press [Resume Printing].

  • If the machine is shared by multiple computers, be careful not to accidentally cancel someone else's print jobs.

  • Under Windows, if the machine is connected to the computer using a parallel cable, sent print jobs may be canceled if [Reset All Jobs] is pressed while “Waiting for print data...” is on the control panel. After the interval set in [I/O Timeout] in Printer Features has passed, the next print job can be sent. A print job sent from a different client computer will not be canceled in this case.

  • You cannot stop printing data that has already been processed. For this reason, printing may continue for a few pages after you press [Job Reset] or the [Clear/Stop] key.

  • A print job containing a large volume of data may take considerable time to stop.

  • For details, see "Canceling a Print Job".