Skip header
 

Form Feed

This section gives instructions for operating the machine when there is no tray for the selected paper size or type, or when paper loaded in the machine has run out.

Important

  • The tray cannot be changed if the following functions are set:

    • Staple

    • Punch

    • Duplex Print to a tray that does not support duplex printing

    • Cover Sheet

    • Front and Back Cover Sheet

    • Slip Sheet

    • Chaptering

    • Chapter Slip Sheets

Note

  • If form feed is selected for a tray with the following settings, you can change the tray by canceling the settings:

    • Staple

    • Punch

    • Duplex

  • If Auto Continue is selected, form fed paper is printed after a set interval. See "Printer Features", General Settings Guide.