Skip headerimage
ManualsContentsPreviousNextHelp

Top Page > General Settings Guide > System Settings > Tray Paper Settings

Tray Paper Settings

This section describes the user tools in the Tray Paper Settings menu under System Settings.

Default settings are shown in bold type.

Important

Paper Tray Priority: Copier (copier/Document Server)

Specify the tray to supply paper for output.

The default setting is Tray 1.

When optional paper tray unit is installed, [Tray 3] and [Tray 4] are displayed.

When optional Large Capacity Tray (LCT) is installed, [LCT] is displayed.

Paper Tray Priority: Facsimile (facsimile)

Specify the tray to supply paper for output.

The default setting is Tray 1.

When optional paper tray unit is installed, [Tray 3] and [Tray 4] are displayed.

When optional Large Capacity Tray (LCT) is installed, [LCT] is displayed.

Paper Tray Priority: Printer (printer)

Specify the tray to supply paper for output.

The default setting is Tray 1.

When optional paper tray unit is installed, [Tray 3] and [Tray 4] are displayed.

When optional Large Capacity Tray (LCT) is installed, [LCT] is displayed.

Tray Paper Size: Tray 1-4

Select the size of the paper loaded in the paper tray.

[Tray Paper Size: Tray 3] and [Tray Paper Size: Tray 4] appear only when the optional paper tray unit is installed.

  • The paper sizes you can set for tray 1 are as follows:

    • Metric version

      "Auto Detect", "A3Landscape", "B4 JISLandscape", "A4Landscape", "A4Portrait", "B5 JISLandscape", "B5 JISPortrait", "A5Landscape", "A5Portrait", "11multiplication17Landscape", "11multiplication14Landscape", "81/2multiplication14Landscape", "81/2multiplication13Landscape", "81/2multiplication11Landscape", "81/2multiplication11Portrait", "81/4multiplication14Landscape", "81/4multiplication13Landscape", "8multiplication13Landscape", "8multiplication101/2Landscape", "8multiplication101/2Portrait", "71/4multiplication101/2Landscape", "71/4multiplication101/2Portrait", "51/2multiplication81/2Landscape", "8KLandscape", "16KLandscape", "16KPortrait", "Custom Size"

    • Inch version

      " Auto Detect", "11multiplication17Landscape", "11multiplication14Landscape", "81/2multiplication14Landscape", "81/2multiplication13Landscape", "81/2multiplication11Landscape", "81/2multiplication11Portrait", "81/4multiplication14Landscape", "81/4multiplication13Landscape", "8multiplication13Landscape", "8multiplication101/2Landscape", "8multiplication101/2Portrait", "71/4multiplication101/2Landscape", "71/4multiplication101/2Portrait", "51/2multiplication81/2Landscape", "A3Landscape", "A4Landscape", "A4Portrait", "A5Landscape", "A5Portrait", "B4 JISLandscape", "B5 JISLandscape", "B5 JISPortrait", "8KLandscape", "16KPortrait", "16KLandscape", "Custom Size"

    You can specify a custom size of between 140.0-297.0mm (5.52"-11.69") vertically, and between 182.0-432.0mm (7.17"-17.00") horizontally.

  • The paper sizes you can set for tray 2 are as follows:

    • Metric version

      " Auto Detect", "A3Landscape", "B4 JISLandscape", "A4Landscape", "A4Portrait", "B5 JISLandscape", "B5 JISPortrait", "A5Landscape", "A5Portrait", "B6 JISLandscape", "A6Landscape", "11multiplication17Landscape", "11multiplication15Landscape", "11multiplication14Landscape", "10multiplication15Landscape", "10multiplication14Landscape", "81/2multiplication14Landscape", "81/2multiplication13Landscape", "81/2multiplication11Landscape", "81/2multiplication11Portrait", "81/4multiplication14Landscape", "81/4multiplication13Landscape", "8multiplication13Landscape", "8multiplication101/2Landscape", "8multiplication101/2Portrait", "71/4multiplication101/2Landscape", "71/4multiplication101/2Portrait", "51/2multiplication81/2Landscape", "41/8multiplication91/2Landscape", "37/8multiplication71/2Landscape", "C5 EnvLandscape", "C6 EnvLandscape", "DL EnvLandscape", "100multiplication148Landscape", "8KLandscape", "16KLandscape", "16KPortrait", "Custom Size"

    • Inch version

      "Auto Detect", "11multiplication17Landscape", "11multiplication15Landscape", "11multiplication14Landscape", "10multiplication15Landscape", "10multiplication14Landscape", "81/2multiplication14Landscape", "81/2multiplication13Landscape", "81/2multiplication11Landscape", "81/2multiplication11Portrait", "81/4multiplication14Landscape", "81/4multiplication13Landscape", "8multiplication13Landscape", "8multiplication101/2Landscape", "8multiplication101/2Portrait", "71/4multiplication101/2Landscape", "71/4multiplication101/2Portrait", "51/2multiplication81/2Landscape", "41/8multiplication91/2Landscape", "37/8multiplication71/2Landscape", "B4 JISLandscape", "A3Landscape", "A4Landscape", "A4Portrait", "B5 JISLandscape", "B5 JISPortrait", "A5Portrait", "A5Landscape", "B6 JISLandscape", "A6Landscape", "C5 EnvLandscape", "C6 EnvLandscape", "DL EnvLandscape", "100multiplication148Landscape", "8KLandscape", "16KLandscape", "16KPortrait", "Custom Size"

    You can specify a custom size of between 100.0-297.0mm (3.94"-11.69") vertically, and between 148.0-432.0mm (5.83"-17.00) horizontally.

  • The paper sizes you can set for tray 3 and tray 4 are as follows:

    • Metric version

      "Auto Detect", "A3Landscape", "B4 JISLandscape", "A4Landscape", "A4Portrait", "B5 JISLandscape", "B5 JISPortrait", "A5Landscape", "A5Portrait", "11multiplication17Landscape", "11multiplication14Landscape", "81/2multiplication14Landscape", "81/2multiplication13Landscape", "81/2multiplication11Landscape", "81/2multiplication11Portrait", "81/4multiplication14Landscape", "81/4multiplication13Landscape", "8multiplication13Landscape", "8multiplication101/2Landscape", "8multiplication101/2Portrait", "71/4multiplication101/2Landscape", "51/2multiplication81/2Landscape", "8KLandscape", "16KLandscape", "16KPortrait", "Custom Size"

    • Inch version

      "Auto Detect", "11multiplication17Landscape", "11multiplication14Landscape", "81/2multiplication14Landscape", "81/2multiplication13Landscape", "81/2multiplication11Landscape", "81/2multiplication11Portrait", "81/4multiplication14Landscape", "81/4multiplication13Landscape", "8multiplication13Landscape", "8multiplication101/2Landscape", "8multiplication101/2Portrait", "71/4multiplication101/2Landscape", "51/2multiplication81/2Landscape", "A3Landscape", "A4Landscape", "A4Portrait", "A5Landscape", "A5Portrait", "B4 JISLandscape", "B5 JISLandscape", "B5 JISPortrait", "8KLandscape", "16KPortrait", "16KLandscape", "Custom Size"

    You can specify a custom size of between 140.0-297.0mm (5.52"-11.69") vertically, and between 182.0-432.0mm (7.17"-17.00") horizontally.

The default setting for Tray 1-4 is Auto Detect.

The paper guide for the optional LCT is fixed for A4Portrait, 81/2"multiplication11"Portrait size paper. Contact your service representative if you need to change the paper size.

Printer Bypass Paper Size

Specify the size of the paper in the bypass tray when printing data from the computer.

  • The paper sizes you can set for bypass tray are as follows:

    • Metric version

      "Auto Detect", "A3Landscape", "B4 JISLandscape", "A4Landscape", "A4Portrait", "B5 JISLandscape", "B5 JISPortrait", "A5Landscape", "A5Portrait", "B6 JISLandscape", "A6Landscape", "11multiplication17Landscape", "11multiplication15Landscape", "11multiplication14Landscape", "10multiplication15Landscape", "10multiplication14Landscape", "81/2multiplication14Landscape", "81/2multiplication13Landscape", "81/2multiplication11Landscape", "81/2multiplication11Portrait", "81/4multiplication14Landscape", "81/4multiplication13Landscape", "8multiplication13Landscape", "8multiplication101/2Landscape", "8multiplication101/2Portrait", "8multiplication10Landscape", "8multiplication10Portrait", "71/4multiplication101/2Landscape", "71/4multiplication101/2Portrait", "51/2multiplication81/2Landscape", "41/8multiplication91/2Landscape", "37/8multiplication71/2Landscape", "C5 EnvLandscape", "C6 EnvLandscape", "DL EnvLandscape", "100multiplication148Landscape", "8KLandscape", "16KLandscape", "16KPortrait", "Custom Size"

    • Inch version

      "Auto Detect", "11multiplication17Landscape", "11multiplication15Landscape", "11multiplication14Landscape", "10multiplication15Landscape", "10multiplication14Landscape", "81/2multiplication14Landscape", "81/2multiplication13Landscape", "81/2multiplication11Landscape", "81/2multiplication11Portrait", "81/4multiplication14Landscape", "81/4multiplication13Landscape", "8multiplication13Landscape", "8multiplication101/2Landscape", "8multiplication101/2Portrait", "8multiplication10Landscape", "8multiplication10Portrait", "71/4multiplication101/2Landscape", "71/4multiplication101/2Portrait", "51/2multiplication81/2Landscape", "41/8multiplication91/2Landscape", "37/8multiplication71/2Landscape", "A3Landscape", "B4 JISLandscape", "A4Landscape", "A4Portrait", "B5 JISLandscape", "B5 JISPortrait", "A5Landscape", "A5Portrait", "B6 JISLandscape", "A6Landscape", "C5 EnvLandscape", "C6 EnvLandscape", "DL EnvLandscape", "100multiplication148Landscape", "8KLandscape", "16KLandscape", "16KPortrait", "Custom Size"

The default setting is Auto Detect.

You can specify a custom size of between 90.0-305.0mm (3.55"-12.00") vertically, and between 148.0-600.0mm (5.83"-23.62") horizontally.

Paper Type: Bypass Tray

Set the display so you can see what type of paper is loaded in the bypass tray.

  • The paper types you can set for the bypass tray are as follows:

    No Display, Recycled Paper, Special Paper, Colour Paper, Letterhead, Label Paper, OHP (Transparency), Thick Paper, Thin Paper

The default setting is No Display.

Paper Type: Tray 1-4

Set the display so you can see what type of paper is loaded in each paper tray. The print function uses this information to automatically select the paper tray.

  • The paper types you can set for tray 1, 3 and 4 are as follows:

    No Display, Recycled Paper, Special Paper, Colour Paper, Letterhead

  • The paper types you can set for tray 2 are as follows:

    No Display, Recycled Paper, Special Paper, Colour Paper, Letterhead, Label Paper, OHP (Transparency), Thick Paper, Thin Paper

The default setting for "Paper Type" is No Display.

The default setting for "Apply Duplex" is Yes.

The default setting for "Apply Auto Paper Select" is Yes.

A image mark appears next to the paper tray if [No] is selected in "Auto Paper Select".

"Auto Paper Select" can only be selected for the copier function if [No Display] and [Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not valid for the tray.

Cover Sheet Tray

Allows you to specify and display the paper tray that is setting cover sheets.

After selecting the paper tray, you can also specify the display timing and copy method for two-sided copying.

The default setting for "Tray to Program" is Off.

Functions using the cover sheet tray setting are the front cover function and front/back cover function.

When [At Mode Selected] is selected, cover sheet tray settings only appear when the cover function or slip sheet function is selected.

When [Full Time] is selected, the cover sheet tray is always displayed.

You can set Copying Method in Duplex only when [At Mode Selected] is selected.

Slip Sheet Tray

Allows you to specify and display the paper tray that is inserting slip sheets.

After selecting the paper tray, you can also specify the display timing and copy method for two-sided copying.

The default setting for "Tray to Program" is Off.

When [At Mode Selected] is selected, slip sheet tray settings only appear when the cover function or slip sheet function is selected.

Designation Sheet 1 Tray, Designation Sheet 2 Tray

Specify which paper tray you want to load the chapter division sheets from, and make sure confirmation of your setting is displayed. When you have selected the tray, specify the confirmation timing and the copy method for two sided copying.

The default setting for "Tray to Program" is Off.

When [At Mode Selected] is selected, slip sheet tray settings only appear when the cover function or slip sheet function is selected.

TopPreviousNext
Copyright (C) 2007