Skip headerimage
ManualsContentsPreviousNextHelp

500-sheet Paper Feed Trays

The following example explains how to load paper into paper trays, and how to change paper size.

The same procedure can be used for all trays. Tray 1 is used as an example.

Important

  1. Carefully pull out the paper tray until it stops.

    Paper tray illustration

    When printing using the bypass tray, do not pull out the paper tray.

  2. Unlock the side guides.

    Paper tray illustration

  3. Pinch the clip on the side guide (image), and match the guides to the paper size (image).

    Paper tray illustration

  4. Align and load paper in the tray with the print side up.

    You can load up to 550 sheets in each tray.

    Paper tray illustration

  5. Pinch the clips on the end guide (image), and match the guide to the paper size (image).

    Paper tray illustration

    Confirm that there are no gaps between the paper and paper guides. If there are gaps, adjust the guides.

  6. Lock the side guides.

    Paper tray illustration

  7. Push the paper tray carefully into the printer until it stops.

    If you push the tray forcefully, the paper guides might move.

Reference

Related topics

Setting paper size not selected automatically
Setting custom size paper
Specifying a paper type