Printer setup |
Select [Paper Input] [Paper Type: (tray name)] [Letterhead]. |
Printer driver setup |
Select [Letterhead] in [Paper Type]. |
Supported paper feeding tray |
Any input tray can be used. |
Paper capacity |
Make sure paper is not stacked higher than the upper limit mark ( ) inside the tray. When using the bypass tray, make sure paper is not stacked higher than the paper guides inside it. |
Duplex printing |
Supported |
Letterhead setup |
Default: [Letterhead 1] If the print quality needs to be improved, select [Maintenance] [General Settings] [Letterhead] [Letterhead 1] to [Letterhead 3] to change the setting value to a different number depending on the paper thickness that you are using. High numbered settings allow thicker paper to be used, but are printed more slowly. |
Additional cautions |
Paper tray: When loading paper vertically, make sure to set its header to the back; when horizontally, make sure to set its header to the left.
Bypass tray: When loading paper vertically, make sure to set its header to the back; when horizontally, make sure to set its header to the right.
|