Skip headerimage
ManualsContentsPreviousNextHelp

Top Page > Hardware Guide > Paper and Other Media > Paper Recommendations > Types of Paper and Other Media > OHP transparencies

OHP transparencies

Printer setup

Select [Paper Input] [Paper Type: Bypass Tray] [OHP transparencies].

Printer driver setup

Select [OHP transparencies] in [Paper Type].

Supported paper feeding tray

Bypass tray

Paper capacity

Make sure paper is not stacked higher than the paper guides inside the bypass tray.

Duplex printing

Not supported

Additional cautions

  • When loading OHP transparencies, take care not to load them upside down. Doing so may cause a malfunction.

  • It is recommended to place one sheet at a time.

  • Make sure to fan OHP transparencies every time before printing. Leaving OHP transparencies loaded in the paper tray may cause them to stick together and result in a misfeed.

  • If multiple OHP transparencies are fed at the same time, load them one by one.

  • When printing on OHP transparencies, remove the transparencies one by one as they are output.
TopPreviousNext
Copyright (C) 2007