Cover Open/Tray Not Detected (Tray 2)
Tray 2 is not properly installed, or its cover is not properly attached. Make sure the tray is properly installed and its cover is properly attached.
Hold the grip on tray 2, lift the tray slightly (
), and then pull it out (
).Pull tray 2 completely out. Take care not to drop it.
Attach the tray cover properly.
Push tray 1 gently in until it stops.
If the Tray 1 cover becomes misaligned or detached during printing, printing stops.
However, if [Aut.Tray Select] in [Paper Input] is set to [On], the printer switches automatically to another paper tray and printing continues.
