



	Contents Previous Next

Top Page > Maintaining > Moving > Moving a Long Distance

Moving a Long Distance

If you intend to move the machine over a long distance, you must pack it well. Empty all the paper trays, but do not remove the print cartridge. Take care not to tip or tilt the machine during transit. When the machine is relocated, uninstall and then reinstall the network interface board.

After moving the machine, be sure to release the shipping lock before switching on.

Turn the power off, disconnect the USB cable, or Ethernet cable, and then unplug the power cord from the wall outlet. Do not remove the print cartridges. Remove the paper.
Pull the scanner unit release lever, and then lift the scanner unit.
Lock the shipping lock, and then close the scanner unit.

Contact sales or service representative for details.

The inside of the machine may become dirty if the machine is not level when transported.