Skip headerimageimage
ContentsPreviousNextHelp

Moving a Short Distance

The precautions when moving the machine a short distance or long distance are explained.

CAUTION


  • The Machine weighs approximately 23 kg (50.6 lb.).

  • When moving the machine, hold the machine by the bottom below the two indentations. Lift the machine slowly in order to avoid straining your body. Lifting the machine without sufficient strength or assistance or handling it roughly and dropping it could cause an injury.


  • Unplug the power cord from the wall outlet before you move the machine. While moving the machine, you should take care that the power cord will not be damaged under the machine.


  • When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).

Important

  1. Turn the power off, disconnect the USB cable, or Ethernet cable, and then unplug the power cord from the wall outlet.

  2. Pull the scanner unit release lever, and then lift the scanner unit.

    detail illustration

  3. Lock the shipping lock, and then close the scanner unit.

    detail illustration

  4. Always lift and carry the machine with another person. Grip the indented area near the machine's base (shown in the illustration). Lift and carry the machine slowly and carefully.

    display panel illustration