Skip headerimageimage
ContentsPreviousNextHelp

Last number Redial

By pressing the [Pause/Redial] key, you can redial and fax to the last dialed destination.

This function saves time when you are sending to the same destination repeatedly, as you do not have to enter the destination each time.

This function is not available for Internet Fax.

If the last person to dial a number on the machine sent the document under [Send Later] this function cannot be used.

  1. Press the [Fax] key, and make sure the [Memory Trans.] indicator lights.

    panel keys illustration

    Normally memory transmission mode is selected.

    To send by immediate transmission mode, press the [Memory Trans.] key. Make sure the [Memory Trans.] indicator is unlit.

  2. Place the original.

    16:00    Std    100%
     -Set Orig- Fax Only

    To change the scan settings, press the [Resolution] key, and then specify the settings.

  3. Press the [Pause/Redial] key.

    panel keys illustration

  4. Press the [B&W Start] key.

    panel keys illustration

    After transmission, the initial screen appears.