Changing Modes

To switch to a different function screen, press the corresponding function key. When you do this, the key you pressed lights. On the control panel, the initial screen of the selected function appears.

Copy

If you press any of the following keys, the machine switches to the copier screen and the copy indicator lights:

[2 in 1 / Sort] key.
[Zoom] key.
[Select Paper Tray] key.

Fax

If you press any of the following keys, the machine switches to the facsimile screen and the facsimile indicator lights:

[Memory trans.] key.
[Pause/Redial] key.
[On Hook Dial] key.
[Fax Options] key.
[Address Book] key.
[Speed Dial] key.

After pressing the [Fax Options] key, you cannot switch functions while changing the Fax Features settings.

Function Priority

If the machine is rebooted by [Auto Reset Time] or switched off and then back on, it is reset and its initial settings are restored. You can specify the machine's initial settings using [Func. Priority] under [System Settings].

You cannot switch modes during initial setup.

Setting the Machine